Counterfeit Detection

The Counterfeit Detection & Authenticity Test performed by RGM SPACE is based on:
• Comprehensive knowledge of electronic components field;
• ISO 9001 and ISO 9100 certified Laboratory;
• EN 9120 Certification;
• Full in-house capabilities and experienced Team.

In a period of lack of materials and long lead times, purchase counterfeited electronic parts is a risk that needs to be managed in order to avoid problems on the final product.
The safest course of action is to buy directly from the manufacturer. Sometimes, the lead times provided from the manufacturer are not compatible with the project time schedule thus resolving into buying readily available lots. To mitigate the risk of buying such lots, a counterfeit detection analysis is advisable.
The counterfeit detection analysis aim is to identify any possible feature that may be an indication that the received parts are different from an original unmounted part.
After a thorough documentation review, an in depth external visual inspection of the parts is carried out. The surface, the marking and the terminations are checked to verify that everything is as expected.
X-rays can be also used to verify non-destructively the uniformity of the lot and the correspondence with the layout defined in the datasheet/specification.
Afterward, the device surface is tested to ensure that it has not been reworked in any way with techniques such as remarking, resurfacing or black topping.
Finally, the parts are delidded/depotted to verify the originality of the die. When available every test is compared to a golden sample.
RGM SPACE quality system is in line with guidelines SAE international per AS6081 (Fraudulent/Counterfeit Electronic Parts: Avoidance, Detection, Mitigation, and Disposition – Distributors).
Our internal procedures take into account the ESA, SAE and UNE standards.

Type: Service
Available standards (e.g. ASTM, MIL): ESA, SAE and UNE standards
ISO/IEC 17025
ISO 9001