Thermal Vacuum Test Chamber SESiLOX

The TV chamber SESiLOX serves for thermal vacuum tests and calibrations of optical and electronical hardware assemblies in an ISO 8 environment.

The TV chamber has an integrated optical bench for test purposes as well as one large optical bench and diverse ESD work tables. The laboratory can be completely darkened, to exclude scattered light for optical measurements. For performances of laser tests in the TV chamber a wall breakthrough to the optical measurement setups in the AIV/Laser Laboratory in the adjoining room is available.

Oil and vibration-free turbo and forepumps achieve 1E-6 mbar. A temperature range between -196°C and +100°C is achieved with a nitrogen gas mix system and is continuisly.

Further features are available:
- MOC samples
- different sizes of thermal support plates
- cold trap
- Yokogawa data aquisition
- electrical feed-throughs (Sub-D, Micro-D, SpaceWire, SMA)
- HUBER thermostats for three additional different
temperature areas

Type: Service
Features thermal:
Solar simulator
Thermal plate
Temperature controlled shroud
Specimen length [mm]: 1500.0
Specimen width/dia [mm]: 1000.0
Mass max. [kg]: 100.0
Higher temperature [K]: 373.0
Lower temperature [K]: 77.0
Temperature change rate [±K/min]: 5.0
Feedthroughs: Sub-D, Micro-D, SMA, SpaceWire
Data acquisition: 40x PT100, Temperature, Voltage, Pressure, TQCM
Vacuum limit [hPa] [mbar]: 1E-6
Cleanroom classes (ISO 14644-1):
ISO Class ≤5
ISO Class 6
ISO Class 7
ISO Class 8
ISO Class 9
ISO/IEC 17025
ISO 9001
Keywords: TVAC test, TV test, Thermal Vacuum, Test, Thermal Cycling, Bake out, tvac