EMC Chamber - 3m distance

ISQ's LABCEM EMC test chamber is a semi-anechoic full compliance chamber designed for testing small equipment at a distance of 3 m. The chamber has the following approximate dimensions: 8 m compartment, 5 m length and 5.5 m height, or a volume of 220 m^3.
The laboratory performs testing during all stages of product life, including precompliance testing, final testing, product inspection and validation. This process may involve a product certification body. ISQ has agreements with the Certification Body CERTIF (Association for the Certification) for swifter certification process which issue the licenses based in the ISQ test reports.
After concluding two investments in the NewSpace and Aero.Next programs we will establish capabilities for the EMC tests of the ESA ECSS-E-ST-20-07C Rev.2 standard for space applications, practically all of the military tests of the MIL-461G standard as well as the EMC tests of RTCA-DO-160G, as well as many engineering tests that are not covered by these documents, for space, automotive and other industrial areas.

The areas below, cover, in a non extensive way the products and test methods we support.
Electromobility Product Standards
eBykes, respective systems and ESA’s – EN 15194
Light vehicles not subject to TA – EN 17128

UN ECE R-10 ESA and STU Approvals
All component testing to §6

A/C Standards
A/C physical testing methods: Direct current injection, Low-Level Swept Currents and Low-Level Swept Fields to EUROCAE ED-107 and e SAE 5583A
EM3D A/C model simulation and validation

Emission Product Standards
Residential, commercial and light-industrial environments – EN 61000-6-3
Industrial environments equipment – EN 61000-6-4
Household, electric tools and similar apparatus – EN 55014-1
Information technology equipment -EN 55022 and EN 55032
Measurement, control and laboratory electric equipment – EN 61326
Lighting and similar equipment -EN 55015
Industrial, scientific and medical equipment – EN 55011
Railway applications – EN 50121-x
Automotive environments – CISPR 25
Immunity Product Standards
Equipment for residential, commercial and light-industrial environments – EN 61000-6-1
Industrial environments equipment – EN 61000-6-2
Household appliances, electric tools and similar apparatus – EN 55014-2
Information technology equipment – EN 55024 and EN 55035
Measurement, control and laboratory electric equipment – EN 61326
Lighting and similar equipment – EN 61547
Fire, intruder and social alarm systems components – EN 50130-4
Fixed firefighting systems - Components for gas extinguishing systems – EN 12094-1
Alarm systems - Intrusion and hold-up systems – EN 50131-x
Fire detection and fire alarm system components – EN 54-x and ISO 7240-x
Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull – EN 60533
Electrical installations in ships - Automation, control and instrumentation – EN 60092-504
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test result – EN 60945
Railway applications - Electromagnetic compatibility – EN 50121-x
Railway applications - Rolling stock - Electronic equipment – EN 50155

Products incorporating radio functions
Products incorporating radios supported by ETSI family of standards EN 301 489-x

Other CE areas
Weighing instruments for MID – EN 45501/OIML R-76
Basic emissions test methods supported for CE and automotive sector
Harmonic currents – EN 61000-3-2 and EN 61000-3-12
Voltage fluctuations and flicker – EN 61000-3-3 and EN 61000-3-11
Discontinuous noise in power ports/clicks – EN 55014-1
Radiated disturbance power – EN 55014-1
Radiated magnetic field – EN 55015 and EN 55016-2-2
Continuous noise in AC/DC power and telecommunication ports – EN 55022, EN 55016-2-1, EN 55032
Radiated electromagnetic field – EN 55022, EN 55032, EN 55016-2-3
ESA conducted emissions: AN and CP methods– EN 55025
ESA radiated emissions: ALSE method – EN 55025
ESA transient emissions – ISO 7637-2
Basic immunity test methods supported for CE and automotive sector
Electrostatic discharges – EN 61000-4-2
Radiated electromagnetic fields – EN 61000-4-3
Electrical transients/bursts – EN 61000-4-4
Surges – EN 61000-4-5
Conducted disturbances, induced by radio-frequency fields – EN 61000-4-6
Magnetic fields at mains frequency – EN 61000-4-8
Pulse magnetic field – EN 61000-4-9
Voltage dips, short interruptions and voltage variations – EN 61000-4-11 and EN 61000-4-34
ESA electrical disturbances – ISO 7637-x
ESA electrostatic discharge – ISO 10605
ESA radiated electromagnetic disturbance, ALSE – ISO 11452-2
ESA conducted electromagnetic disturbance, BCI – ISO 11452-4
ESA immunity to narrowband disturbances, magnetic field – ISO 11452-8
ESA immunity to narrowband disturbances, portable transmitters – ISO 11452-9
ESA immunity to narrowband disturbances, AF – ISO 11452-10

Automotive manufacturers EMC standards covered
Ford, PSA, VW, etc

Type: Service
ISO/IEC 17025
ISO 9001
Keywords: EMC, electromagnetic compatibility