IDR/UPM TVAC Testing facility

Thermal vacuum chamber located in Madrid, Spain.
The facility is ideal for testing instruments and small satellites. The chamber has an bare aluminum baseplate and black-painted shroud that can be controlled independently. The baseplate can be covered with high emitivity layer for radiative environment testing (as it is shown in the picture).
The chamber can be used for bake-out and outgassing. We can mount a TQCM as needed.

Type: Service
Features thermal:
Solar simulator
Thermal plate
Temperature controlled shroud
Specimen length [mm]: 700.0
Specimen width/dia [mm]: 700.0
Specimen height/thk [mm]: 700.0
Higher temperature [K]: 423.0
Lower temperature [K]: 123.0
Temperature change rate [±K/min]: 3.0
Feedthroughs: ISO-K 160
Data acquisition: Type T thermocouples
Vacuum limit [hPa] [mbar]: 10-7
Cleanroom classes (ISO 14644-1):
ISO Class ≤5
ISO Class 6
ISO Class 7
ISO Class 8
ISO Class 9
Keywords: TVAC, Thermal testing, Thermal Vacuum Test, Thermal Balance Test