Thermal Cycling Testing Vötsch

Temperature chamber Vötsch VMC³ 06/500/S

The RUAG Space Test Center is equipped with the temperature chamber VMV³06/500/S from Vötsch. This temperature chamber are able to regulate the temperature between a minimum of -60°C up to a maximum of +100°C. Besides this chamber has the ability to change the temperature by a rate of 8 ±K/min. The Tests can be programmed with the control and recording system and is fully network compatible. In addition it can combine with a LDS V964 shaker. So it can also perform a vibration test under special environment conditions.

Accredited test method:

temperature

• EN 60068-2-1/2

• MIL-STD-810 Meth. 501/502

• RTCA DO-160 Section 5

• V009 100 Guideline USP of GR test Nr.101/102

• ASTM F1980 – 16

cycling

• RTCA DO-160 Section 5

• ECSS-E-10-03A

or according customer specifications.

Because of a extensive experience of testing our in-house projects, our specialists ensure a high quality service. In addition the RUAG Space Test Center is an accredited test center according to ISO EN 17025.

Specimen length [mm]: 850.0
Specimen width/dia [mm]: 850.0
Specimen height/thk [mm]: 700.0
Mass max. [kg]: 50.0
Higher temperature [K]: 373.0
Lower temperature [K]: 213.0
Temperature change rate [±K/min]: 8.0
Data acquisition: Operational data are recorded automatically; additional data acquisition can be provided
Project heritage: This facility is used for the test of space equipment as well as of other highly sensitive industrial products and prototypes.
Certification:
ISO/IEC 17025
ISO 9001
AS/EN/JISQ 9100
Keywords: temperature testting, chamber, temperature, thermal cycling, ruag