Pyroshock Test in TÜV Facilities

The "Pyroshock" testing machine simulates vibrations that occur during the orbital operations of the satellite. During this phase, series of microexplosive charges are detonated in order to free systems safety retentions (of antennas, solar panels, etc..). Detonations generate mechanical stress on the installed equipments reaching 10.000 g of peak acceleration.

The “Pyroshock” equipment is capable of generating mechanical shocks with same dynamic behavior of those recorded in-field trough shocks are produced by mechanical impact on a resonant plate. The system is equipped with accelerometers and multichannel acquisition panel capable to record and process the detected signals.

Test method

The sample is installed on a plate vertically hanged. The plate is subjected to an impact via a specific hammer. During the impact the plate vibrate and transmit the shock to the sample.

Type: Service
Available standards (e.g. ASTM, MIL): MIL-STD-810, RTCA DO -160
Features mechanical:
Static load
Micro vibration
Specimen length [mm]: 900.0
Specimen width/dia [mm]: 900.0
Specimen height/thk [mm]: 900.0
Mass max. [kg]: 38.0
Frequency min. [Hz]: 100.0
Frequency max. [Hz]: 10000
Acceleration shock [g]: 10000
Level max [dB]: 6.0
Data acquisition: Analysis Frequency : 10 ÷ 200000 Hz; Sampling frequency: 82 KHz; Capture Duration : 100 msec; Damping 5%( Q=10 ); Analysis Octave Spacing :1/48; SRS Type :Maxi-Max. and Acceleration (time history); Number of channels:up to 16.
ISO/IEC 17025
ISO 9001
Keywords: Tuv, Pyro, Pyroshock, Shock testing, Shock Response Spectrum, TUV SUD, tuv sud, TÜV SÜD