Thermal vacuum chamber located in Gliwice, Poland. The chamber is equipped with black thermal shroud and a copper baseplate with independent temperature control. The shroud is cooled with liquid nitrogen. Tested device can be hanged from shroud or mounted to the baseplate with screw connections. The shroud temperature can be controlled in a range from -170 to -40 °C and the baseplate in a range from -60 to 100 °C.
Type:
Service
Available standards (e.g. ASTM, MIL):
E498-95(2000), E296-70(1999), ENISO13849-1, ANSI ISA 88
Features thermal:
Vacuum
Solar simulator
Thermal plate
Temperature controlled shroud
Specimen length [mm]:
750.0
Specimen width/dia [mm]:
530.0
Specimen height/thk [mm]:
675.0
Mass max. [kg]:
100.0
Higher temperature [K]:
373.15
Lower temperature [K]:
103.15
Temperature change rate [±K/min]:
3.0
Feedthroughs:
6 x D-Sub 50 , ISO 160
Data acquisition:
Type K thermocouples
Vacuum limit [hPa] [mbar]:
7E-7
Cleanroom classes (ISO 14644-1):
ISO Class ≤5
ISO Class 6
ISO Class 7
ISO Class 8
ISO Class 9
Keywords:
Thermal Vacuum, Thermal Cycling, Thermal Testing, Thermal Balance Test
